
Consider these two fins. Both are attached to JP 109 Freestyle boards. One fin and board belongs to me, the other to freestyle lunatic (and ABK-meisterAndy Brandt. See if you can tell which is which.
Whenever I’m around serious freestyle windsurfers, the thing that stands out most about their gear is their fins. They’re all “modified”. Modified” is a polite term…they’re amputated fins. They are preposterously short.
What about commercially available freestyle fins? “Too big” everyone says. “You have to make your own!” Long Island’s Mike Burns has been seen sailing on a cut down wave fin. I can’t quite make out what the nub that Mr. Brandt is on was before it was cut away. It seems to me that fin manufacturers could do well for themselves by charging full price for these half-fins. In the meantime, the next time you wreck a fin, just cut away the bulk of it, and celebrate your new piece of gear…you’re now the owner of a custom freestyle fin.
(Yes, I know the red 12″ fin is not properly seated in the finbox. I just stuck it in there to provide scale.)
Leave a Reply to Chris PresslerCancel reply